Views: 0 Author: Site Editor Publish Time: 2026-11-16 Origin: Site
Short answer: in Malaysia there is no single sandwich panel malaysia price — the number is built from core material, thickness, coating, order volume, ocean freight and SIRIM compliance. Budget by specification, not by a per-m² list price, and confirm your supplier holds SIRIM listing FL000302 so the shipment clears import instead of being held at the port.
![]() Rockwool Sandwich Panel - IW | ![]() PU-edge Rock Wool Panel | ![]() VW PU-edge Rock Wool Panel |
|---|
A sandwich panel is made to order. Two enquiries in the sandwich panel malaysia market that both say "sandwich panel" can differ by core, thickness, steel grade, coating and quantity, and each of those moves the price. Treating panels like a catalogue item is the most common way Malaysian projects over- or under-budget. The right move is to fix the specification first, then compare like-for-like quotations.
| Sandwich Panel Price — Key Specs at a Glance | ||||||||||
![]() Made-to-order panels — price follows specification, not a fixed list rate. | ||||||||||
|
At Glostar we have laminated insulated panels in Shandong since 2006 and supply Malaysian projects with SIRIM-listed (FL000302) and CE-certified (EN 14509, NB 2292) panels. The sections below break the price down so you can brief your supplier accurately.
Core: this is the widest band. A non-combustible rock wool core (A2-s1,d0) and a PU/PIR combustible core sit in different price zones, and within PU/PIR, PIR carries a small premium over PU for fire margin. Thickness: cost scales roughly with core volume, so a 150 mm panel costs materially more than a 50 mm one of the same face. Coating: polyester is the economy grade; SMP, HDP and PVDF add cost but extend the repaint cycle from roughly 8 to 20 years. Volume and freight: container load and destination port change the landed number more than most buyers expect.
For Malaysia, SIRIM listing (FL000302) is not optional paperwork — it is the compliance gate that lets panels clear import. A supplier without it can quote lower and still leave you with a shipment held at the port. Verify the listing is current and issued to the actual exporting entity (GLOSTAR) before you place the order. Glostar's panels are SIRIM-listed and CE-certified, so the same shipment can serve Malaysia and other export markets.
Outside Malaysia, CE certification to EN 14509:2013 from notified body NB 2292 (UDEM) is the document most markets ask for. Request the attestation and the type-test report covering fire resistance, bending, bond and peel — these are verifiable and should travel with the quotation.
Fire-governed walls and roofs: the Rockwool Sandwich Panel IW uses a tongue-and-groove connection with hidden fasteners and a non-combustible core — the A2-s1,d0 default for Malaysian factories and warehouses.
Architectural facades: in Malaysian commercial and institutional projects, the Insulated Metal Curtain Wall Panel HW wraps the core in a four-joint metal casing that presents as a flat, continuous screen along the building front.
Joints needing both fire class and weather sealing: PU edge-sealed rock wool panels add rigid polyurethane side seals that hold the A2 line tight through Malaysia's heavy monsoon downpours.
What is the price of sandwich panel in Malaysia? There is no single price — it follows core, thickness, coating, volume and freight. Send the full specification and destination for a per-project quotation rather than comparing headline per-m² rates.
Does SIRIM add to the cost? Yes, compliance carries a cost, but it is non-negotiable for import clearance. A cheaper, non-listed panel can cost far more if it is rejected at the port.
Rock wool or PU core for the Malaysian climate? Rock wool leads on fire class (A2-s1,d0) and heat stability; PU/PIR wins on thin-wall efficiency. Many Malaysian factories choose rock wool for fire safety, while cold-chain and large-span roofs lean PU/PIR.
How long is the lead time? Lead time depends on specification and order volume; confirm it against your project schedule when you request the quotation, and build in ocean transit to Malaysia.
Factory-direct pricing typically falls between USD 14 and 42 per square metre depending on thickness and core — send us your area, location and fire requirement for a project quotation.
Factory direct supply from our Shandong production base since 2006. Free samples and full CE EN 14509 test documentation available on request.
Tell us the application, core, thickness, coating, quantity and destination port, and we will return a per-project specification and landed price with SIRIM and CE documents attached. Contact our team for a Malaysia quote, or browse the insulated sandwich panel range.